- Introduction
- Download the Data file for this course
In this lesson, you will learn how to load a machine used for programming.
In this lesson, you learn how to create a tool holder from a solid model.
- Milling Tool Adapter
- Download the CAD Data file for this course
In this lesson, you will learn how to create a milling extension holder adapter.
- Milling Tool Extension Adapter
In this lesson you will learn how to create a shell milling holder adapter and face mill.
In this lesson, you will learn how to create a drill, chamfer mill, and thread mill.
- Drill, Chamfer Mill, and Thread Mill
In this lesson, you will learn how to create a tombstone for a horizontal style mill.
In this lesson, you will learn how to create a vise fixture with a place for a movable jaw.
In this lesson, you will create a movable vise jaw and test it on a vise fixture.
In this lesson, you will learn how to save a list of tools and a template.
In this lesson, you will learn how to add a solid to the Part Setup and add stock from a file.
In this lesson, you will learn how to create the features for the operations on the first side of the part.
In this lesson, you will use the OP 10 features that was created to define the first set of operations to machine the first side of the part.
In this lesson, you will create the remaining operations to cut the first side of the part.
In this lesson, you will save out the completed Op 10 stock and use it for the operations on the other side.
In this lesson, you will create the features for the operations on the second side of the part.
In this lesson, you will use the features we just created to program the operations for the second side of the part.
In this lesson, you will create a park operation and copy workpiece 1 and 2 to the other locations on the tombstone.
In this lesson, you will post the code for the program and generate a report.
- Post Code and Generate a Report
