In this course, you will learn how to program multiple parts on a 4-axis horizontal machine with a tombstone.
At the end of this course, you will know about:
- Creating a milling tool adapter from a drawing file. - Using extended work offsets. - Loading workpieces onto a tombstone. - Modifying Workplanes. - Saving and loading (.prc) process files. - Using collision detection. - NC Code & Report Generator.
To get the most out of this course, we recommend that have taken these courses:
- Introduction to ESPRIT EDGE. - Single Part Setup on a 3-Axis Vertical Mill.
Course content
1
Introduction
2 lesson resources
Please download the Data file for this course:
Data.zip
Introduction
2
Creating a Holder
2 lesson resources
Please download the DXF file for this course.
DXF Tool Holder.zip
Creating a Holder
3
Defining the Part
2 lesson resources
Please download the CAD Data file for this course:
CAD Data.zip
Defining the Part
4
Setting up the Machine
1 lesson resources
Setting up the Machine
5
Creating a Tool & Loading a Tool List
1 lesson resources
Creating a Tool and Loading a Tool List
6
Creating Op10 Features
1 lesson resources
Creating OP10 Features
7
Facing Operation
1 lesson resources
Facing Operation
8
ProfitMilling Internal & External Features
1 lesson resources
ProffitMilling Internal and external Features
9
Finishing Profiles with Contouring
1 lesson resources
Finishing Profiles with Contouring
10
Verifying Op10
1 lesson resources
Verifying OP 10
11
Saving Op10 Stock & Setting Up Op20
1 lesson resources
Saving Op10 Stock and Setting up Op20
12
Creating Op20 Features & Operations
1 lesson resources
Creating Op20 Features and Operations
13
Mounting Additional Workpieces & Optimizing Program
1 lesson resources
Mounting Additional Workpieces & Optimizing Program
14
Generating NC Code & Reports
2 lesson resources
Generating NC Code & Reports
Multiple Part Setup on a 4-Axis Horizontal Mill_Complete.zip
15
Final Exam - Multiple Part Setup on a 4-Axis Horizontal Mill
