Settings Tab

The "Settings" tab is available in the O-QIS MCA/CMM Reporting and procella. The available functions depend on which module has been started.

	procella Configuration In procella, this button is used to open the dialogue box that is used to organise the processing of the measurement situation. Link to: Configuration of Setup Data Recording in procella Link to: Case Studies - Configuration of Setup Data Recording Depending on the metrological and organisational context, the requirements of the measurement situation may vary, but they may also be the same for different data sets. For this reason, templates for processing of the measurement situation can be created and assigned to a data set. This dialogue box is also used to define those templates. Link to: Default for Layout Configuration in O-QIS procella
	MCA/CMM Reporting Configuration Based on the alarm conditions defined in the evaluation strategy, MCA/CMM Reporting provides the ability to display them. The Alarm Viewer displays not only the most recent alarms, but also a history of alarms, regardless of the measured parts. Link to: Alarm Viewer in O-QIS MCA/CMM Reporting This functionality allows manual characteristics to be recorded within MCA/CMM Reporting. Directly within the same test plan and without any additional manual module change. After confirming a measurement, the summary/input window for manual recording is automatically displayed. Link to: Manual recording in MCA/CMM Reporting
	Link to: Using a Signal Tower

	Link to: procella - Special Measurement

Recommended