Filtering summary graphics is often a daily task for users. In order to avoid repeatedly setting or changing the filter conditions in all summary graphics, the "Quick Filtering in Summary Graphics" allows settings to be specified centrally and filtering to be triggered with a single click.

|
Quick filtering in summary graphics
How to create and handle the predefined filter criteria is explained in this document.
|
English:PDF | German:PDF |
Table of Contents
1 Foreword
The ever-increasing amount of data that occurs during measurement made it more and more necessary for the user to focus on the currently important characteristics. Filtering and sorting options are available, but these were always adjustable per graph and either saved or had to be reset.
With the quick filtering in summary graphics, an option has been created to save firmly defined and self-created filter criteria in order to call them up at the push of a button.
The dialogue can be found under File | Configuration |General settings | General settings 1 | Quick filtering in summary graphics.
2 Mode of operation
To give an idea of the possibilities, only a few variants are shown here, the configuration of which will be explained in more detail in the course of the document.
The predefined filters can be placed on buttons below summary graphics, for example, or made available to users in a application bar. The buttons and the button for deactivating the filtering can be used to filter quickly.
As an example, here is a data set with 10 characteristics, only some of which have the characteristic class "critical" or "significant".
After pressing the included button, the set of characteristics is directly reduced.
3 Predefined filters
3 predefined filter selections are already delivered, which were created on the basis of frequently occurring questions from customers.
|
Filter selection
|
Filtering
|
|
Char-class critical + significant
|
Summary graphics are reduced to the characteristic class "significant" and "critical".
|
|
Requirements not met
|
Only those characteristics are displayed in the evaluating modules which are not capable, or which could not be evaluated.
|
|
Position
|
Only the positional tolerances characteristics are filtered.
|
4 Create filters yourself
Which filter option has which effect is described in the general manual "Filter / Sort". The possibilities of quick filtering in summary graphics are limited to the options that can be used for all summary graphics. The saving of such a filter is explained here.
Select "New filter" in the dialogue
In the lower part, the default name can be reassigned
Then the desired filter settings are to be made:
5 Apply filter
For each filter saved, the function code with which this filter is called up is displayed, as well as the function code to undo this filtering. (general function code, the same for all filters).
Function group is always 3, function number always 75010. The function sub-number defines the filter.
|
Name
|
Group
|
Number
|
Sub-number
|
|
Deactivate filter
|
3
|
75010
|
0
|
|
Filter 1
|
3
|
75010
|
1
|
|
Filter 2
|
3
|
75010
|
2
|
|
Filter 3
|
3
|
75010
|
3
|
|
Filter 4
|
3
|
75010
|
4
|
5.1 Calling up via the application bar
This function code can be integrated as a button in the application bar below summary graphics, as shown in the chapter Mode of operation. Even though this configuration is generally explained in other documents, it should be briefly repeated here.
Using the graphic Characteristics Statistics as an example:
Open application bar configuration.
Click on Additional function.
Enter the required function code and ideally add your own text, multilingual if necessary.
A function created in this way is assigned to a button by dragging it onto a free field in the preview.
After that the application bar can be activated.
Several different buttons with their filters can be configured here.
5.2 Calling up via the button bar
If filters are provided in the button bars, they can be used in all summary graphics.
|
|
The functions and general handling of the Button Bar Designer are described in a separate document. |
|
|
The Button Bar Designer is bound to the licence of the Form Designer (Q-FD), except in Q-DAS O-QIS MCA/CMM Reporting. The Form Designer "Q-DAS FormDesigner" is a chargeable product and requires a valid licence to run. Contact e-mail for further information: info.qdas.mi@hexagon.com. The functions, analysis methods, output points, and graphics offered in the Button Bar Designer are module dependent. Therefore, it is recommended to create or customise the toolbars only in the module in which the toolbars are to be used. |


