Nexus Home | Hardware | Infrared Probe m&h IRP40.02 Hardware

Infrared Probe m&h IRP40.02

The infrared touch probe for mass production

The m&h IRP40.02 infrared touch probe system meets all requirements for measurement on the machine tool. Extreme accelerations, high positioning speeds, constant vibrations, hard tool changes, increased temperatures and aggressive coolants pose no problems for m&h touch probes. m&h’s precision mechanics can continue to switch extremely precisely and without wear for years under all these conditions.

The infrared touch probe for mass production

Training and Resources

Infrared Probe m&h IRP40.02 Specifications

Accuracy	Triggering force	Temperature range	Power supply
max. 0,5 μm (2 Sigma) with 50 mm Stylus and 254 mm/min	X/Y = 0,8 N(₁), Z = 5,7 N(₁)	Operation: 5°- 55°C Storage: 5°- 70°C	2x battery (3,6 V / ½ A A)
Protection class	Signal transmission
IP68: EN60529	Infrared

Accuracy

Triggering force

Temperature range

Power supply

max. 0,5 μm (2 Sigma) with 50 mm Stylus and 254 mm/min

X/Y = 0,8 N(₁), Z = 5,7 N(₁)

Operation: 5°- 55°C

Storage: 5°- 70°C

2x battery (3,6 V / ½ A A)

Protection class

Signal transmission

IP68: EN60529

Infrared

Accuracy
max. 0,5 μm (2 Sigma) with 50 mm Stylus and 254 mm/min
Triggering force
X/Y = 0,8 N(₁), Z = 5,7 N(₁)
Temperature range
Operation: 5°- 55°C Storage: 5°- 70°C
Power supply
2x battery (3,6 V / ½ A A)
Protection class
IP68: EN60529
Signal transmission
Infrared

₁ with 50 mm stylus

Our team is ready to help

Our technical support teams are on hand to answer your questions. Contact us through our online form and we will get right back to you.

HxGN NC Measure (Software)

Infrared Receiver m&h IRR91.50

Communicate with two probing systems simultaneously on the same machine while eliminating ambient light interference.

m&H NC Gage (Software)

The simple use, and innovative “Teach-in” process allow a user to create gauging programs without previous programming knowledge.

3D Form Inspect (Software)

This software enables quick measuring and logging of important geometries and shapes on all sides and axes directly on the machine tool.

Infrared Receiver m&h IRR91.42

IRR91.42 reliably receives measurement and temperature data. It can communicate with m&h infrared probes and infrared tool setters.

3D Form Inspect Jobmaster (Software)

3D Form Inspect increases your productivity, reduces production costs and guarantees high flexibility – together this is Connected Probing.

Infrared Probe m&h IRP25.50

The m&h probes of the new generation allow to operate two IRP25.50 at the same time with only one IRR91.50 receiver.

Infrared Temperature Probe m&h IRP25.50-TP

Fully automated part temperature measurement before and during machining.

Infrared Probe m&h IRP40.42

Low trigger forces and small styli balls for measuring delicate applications.

Website Terms of Use

Imprint

Privacy Notice

Ethics & Compliance