Nexus Home | Hardware | Infrared Temperature Probe m&h IRP25.50-TP

Infrared Temperature Probe m&h IRP25.50-TP

Fully automated part temperature measurement before and during machining.

Skip to

Providing highly precise production results

The m&h IRP25.50-TP temperature probe helps ensure that workpieces are machined only when the temperature is correct. Ideal for cost-intensive workpieces, the m&h IRP25.50-TP uses patented technology to automatically measure workpiece temperature within seconds, both before and during machining. This enables greater control of production processes and adaptation of machining parameters during production.

The m&h IRP25.50 is characterized by its modular structure, enabling the use of various measuring units, different extensions, and cross-probes. The temperature unit can be quickly exchanged with a regular machine tool probing unit, allowing users to optimally adjust the probe for future requirements and machine tool applications at any time.

Infrared Temperature Probe m&h IRP25.50-TP Specifications

Accuracy

±1°C₁
(resolution is 0,1°C)

Measuring range and resolution

13 N (Trigger force with 50mm sensor)

Temperature range

Storage: 5 °C – 70 °C, Operation: 10 °C – 50 °C

Power supply

1 x 9 V battery block, 6LR61 Lithium: 1200 mAh,

Alkaline: 550 mAh

Protection class

IP68: EN60529

Signal transmission

Infrared

₁ The measuring accuracy depends on the condition (surface finish, surface parallelism) and calibration of the workpiece.

Infrared Receiver m&h IRR91.50

Communicate with two probing systems simultaneously on the same machine while eliminating ambient light interference.

HP-L-10.10 Laser Scanning Sensor

Carry out highly accurate, fast and flexible CMM laser scanning with a revolutionary optical multisensory system.

Infrared Receiver m&h IRR91.42

IRR91.42 reliably receives measurement and temperature data. It can communicate with m&h infrared probes and infrared tool setters.

HxGN NC Measure (Software)

Intuitive, versatile, and user-friendly, simplify inspection processes for a range of parts on the machine tool.

m&H NC Gage (Software)

The simple use, and innovative “Teach-in” process allow a user to create gauging programs without previous programming knowledge.

3D Form Inspect (Software)

This software enables quick measuring and logging of important geometries and shapes on all sides and axes directly on the machine tool.

3D Form Inspect Jobmaster (Software)

3D Form Inspect increases your productivity, reduces production costs and guarantees high flexibility – together this is Connected Probing.